Wall Mounted Belt Barrier
A belt unit that lives on the wall. Pull the belt across to close a corridor or doorway, let it retract and the floor is completely clear again.
- Belt length 7.5 ft or 10 ft
- Belt width 2"
- Housing ABS or steel
- Mounting fixed screw
- Receiver clip included
- 6 housing colours
What it is for
A floor standing post has to be stored somewhere when the corridor is open which in practice means it lives in the corridor getting in the way. Wall mounting removes that problem entirely. The unit stays fixed to the wall, the belt pulls across in a second and clips into a receiver on the opposite side, then retracts flush when the route reopens. Nothing to carry, nothing to trip over and nothing to go missing. Supplied with wall fixings and the receiver clip so it is a single install job.
Where it works
- Corridors doorways and stairwells
- Elevator lobbies during maintenance
- Retail back of house
- Offices and schools
Options
Specified, not assumed.
- Belt length
- 7.5 ft or 10 ft
- Housing
- 6 colours
- Belt
- 30 colours and 25 safety messages
Related
See also.
Magnetic Wall Mount Barrier
Cannot drill into the wall or the racking? Magnets hold the unit on any steel surface and move it whenever you need.
Long Wall Mounted Belt Barrier
Wide aisle to close and nothing to mount in the middle? A 35 ft belt spans it from one wall.
Twin Belt Wall Mount Barrier
One belt not stopping people walking through? A second lower belt makes the closure much harder to ignore.